Rigging

Aircraft Tie-Down Hooks

CM aircraft tie-down hook/chain type

  • Strengths are compatible with 9/32" alloy chain having a working load limit of 4100 lbs.
  • Forged from special bar quality alloy steel.
  • Ref. Dept. of Navy P/N 61A101B10.
  • Quenched and tempered for better mechanical properties.
  • Normal self colored finish. Can be painted or hot dip galvanized.

CM aircraft tie-down hook/cargo type

  • Strengths are compatible with 9/32" alloy chain having a working load limit of 4100 lbs.
  • Forged from special bar quality alloy steel.
  • Quenched and tempered for better mechanical properties.
  • Normal self colored finish. Can be painted or hot dip galvanized.

Click Here for Specification Sheet


Alloy Forged Master Link-100% Proof Tested

  • Drop forged using special bar quality alloy steel.
  • Quenched and tempered heat treatment for improved strength.
  • Individually proof tested at 2 times working load limit.
  • Design ultimate strength is 5 times working load limit.
  • Orange paint finish.
  • Large inside widths to accommodate more applications.
  • Markings are raised characters for better identification to assist proper application.

Click Here for Specification Sheet


CM Lodelok Industrial Attachments

  • Designed to be used with Grade 80 and Grade 100 chain, synthetics and wire rope
  • I-beam construction for greater strength
  • Available in several styles; Eye, ClevlokTM, Swivel, HammerlokTM, and Weblok
  • Sizes available from 9/32" to 5/8"
  • Marked with fractions and metric size
  • Factory replacement pin
  • Forged alloy steel, quenched and tempered
  • Designed to meet or exceed ASTM, ASME, NACM, WSTDA, OHSA and BSEN1677 spec's for lifting and rigging attachments
  • Individually proof tested. Certification available upon request
  • Refer to all warning labels before using

Click Here for Specification Sheet


Cable Clips - Malleable

  • For light duty non-critical applications only.
  • Precision manufactured and galvanized to meet or exceed the performance requirement of Federal Specifications (FF-C-450 Type 1 Class 2).
  • Imported

Click Here for Specification Sheet


Cable Clips - Forged

  • Precision manufactured and galvanized to meet Federal Specifications FF-C-450, Type 1, Class 1, on all sizes 1/4" and larger. U-bolts and nuts electrogalvanized on 1/8" and 3/16" sizes, hot dip galvanized all other sizes. All bases hot dip galvanized.
  • Drop forged base.
  • Available in popular sizes.
  • 1/8"-5/8" sizes packed unassembled, two pieces per poly bag and in factory packs.
  • 3/4" and larger sizes shipped assembled in factory packs.
  • Meets MS16842

Click Here for Specification Sheet


Claw Hook

  • Especially designed for easy hook-up to loose or taut chain with one hand connection.
  • Drop forged from special bar quality steel.
  • Heat treated for greater strength and increased wear characteristics.
  • Allows full joint strength when used with high test grade 43 or transport grade 70 chain.
  • Clear protective finish resists rust and provides cleaner handling.
  • For use with 3/8" G43 or G70 chain.
  • Working load limit 6,600 lbs.

Click Here for Specification Sheet


Eye & Eye Swivels

  • Hot dip galvanized - forged from special bar quality steel
  • Ultimate load is 5 times working load limit
  • Meets the performance requirements of RR-C-271D, Type VII, Class 2

Click Here for Specification Sheet


Eyenuts

  • Forged
  • Heat treated
  • Hot galvanized per ASTM A153

Click Here for Specification Sheet


Heavy Duty Hoist Rings

  • Back and side pins constructed of one piece forged alloy steel
  • Less moving parts than competitive rings
  • Bale and center body are closed die forged to assure superior grain flow and consistent dimensional accuracy
  • 100% magnetic particle inspected
  • Patented product specified in wide range of industries
  • Larger bale allows use of a variety of hook sizes
  • Easy disassembly for periodic non-destructive inspection
  • Capacities range from 800-24,000 Ibs.
  • Economically priced

Click Here for Specification Sheet


Mid-Grip Clips

  • Big Orange Mid-Grip wire rope clips meet Federal Specifications FF-C-450, Type III, Class 1, and will provide maximum holding strength when installed and used according to specifications.
  • Double grip, double saddle wire rope clips allow full arc wrench swing for quicker installation, retightening or disassembly of nuts.
  • Unlike U-bolt type rope clips, Mid-Grip clips cannot
    be installed incorrectly with the saddle not on the live rope end.
  • Forged from special bar quality steel with the sizes clearly marked on the saddles.

Click Here for Specification Sheet


PiggyBack Wedge Socket Clip

Revolutionary dual saddle design secures the dead end of a wire rope on a wedge socket and provides the following benefits:

  • Attaches quickly and easily.
  • Prevents load transfer to dead end rope.
  • Eliminates need for short rope piece or loop on dead end.
  • Properly secured dead end reduces possibility of snag/foul and shear off at wedge socket.
  • Available in 3/8" to 1 1/2" sizes.
  • Drop forged saddles.

Click Here for Specification Sheet


Replacement Hook

  • Attaches easily to standard chain of electric hoist using welded link load chain, roller chain or wire rope with applicable end fitting
  • Swivel jaw is forged

Click Here for Specification Sheet


Replacement Latch Kits

Click Here for Specification Sheet


Rigging Eye Hooks

Carbon Rigging Hooks

  • Hook and latch assemblies furnished separately
  • All eye type hooks are furnished pre-drilled for latches
  • Hooks have a clear protective coating to resist rust and for cleaner handling
  • Use suffix "C" when ordering carbon clear finish
  • Carbon hooks are available hot dip galvanized.  Use suffix "G" when ordering.
  • Built in distortion detectors
  • Design factor 5:1

Alloy Rigging Hooks

  • Hook and latch assemblies furnished separately
  • All eye type hooks are furnished pre-drilled for latches
  • Painted orange
  • Built in distortion detectors
  • Design factor 5:1

Click Here for CM alloy eye type slip hook Specification Sheet

Click Here for CM alloy steel hook & CM alloy shank hooks Specification Sheet


Rod End

  • Upset forged.
  • Quenched and tempered.
  • Self colored finish.
  • With or without thread.
  • With or without hole.

Click Here for Specification Sheet


Shank Hook

  • Available in Carbon, Alloy, Stainless & Bronze material.
  • Heat treated, quenched, and tempered.
  • Pre-drilled latch tab allows addition of a latch.
  • Shank hooks are supplied unthreaded.
  • Design Factors: Carbon and Stainless 5:1, Alloy and Bronze 4:1
  • Bronze hooks are provided for non-sparking and non-marring applications.


Shoulder Eyebolt

  • Forged steel
  • Heat treated
  • Quenched & tempered
  • Meets IFI standards, ASTM A489, ANSI/ASME, B18.15

Click Here for Specification Sheet


Shoulder Eyebolt - Specials

  • Drop forged
  • Quenched and tempered
  • Self colored

Click Here for Specification Sheet


Snap Hook

  • Stainless steel latches, springs, bolts and nuts.
  • Ultimate load is 4 times the working load limit.

Click Here for Specification Sheet


Sorting Hook

Two styles of Sorting Hooks. Designed for efficient handling of flat plates or large cylindrical shapes. Long tapered point designed for easy grab in rings, pear links, eyebolts or lifting holes.

CM Sorting Hook

  • Forged from special bar quality steel
  • Heat treated, Quenched & Tempered
  • Designed for efficient handling of flat plates, large cylindrical shapes and lifting loops.
  • Long tapered point designed for easy grab in rings, pear links, eyebolts, or lifting holes.
  • Painted orange.
  • Design factor 5:1

CM Handled Sorting Hook

  • Handled Sorting Hook features a handle on the back to help in placing and removing the sorting hook from the  load.
  • Orange finish* is a high tech two component urethane electro static 
    baked-on finish.
  • Forged from special bar quality steel - heat treated.
  • Working load limit is 7 1/2- tons in the bottom of the sorting hooks (normal loading area of any hook). Working load limit drops to 2 tons when using hook in a tip loading application (sticking the point into a pipe or tube, etc).

Click Here for Specification Sheet


Specialty Engineered Hoist Rings

  • Bale and shoulder pins machined from alloy steel
  • Patented design provides shoulder pin retention with specialized clip
  • Easy disassembly for periodic non-destructive inspection
  • Capacity range from 800-100,000 Ibs.
  • Specials available in stainless steel and metric sizes

Click Here for Specification Sheet


Steel Swage Buttons

  • Fittings machined from specially selected and processed low carbon steel
  • 98% efficiency rating based on catalog strength of wire rope when properly installed
  • Made in U.S.A.

Click Here for Specification Sheet


Steel Swaging Sleeves

  • Carbon steel sleeves come with unique color change quality control feature - color changes intensity once sleeve has been pressed verifying that swaging has occurred
  • Zinc plating extends shelf life and resists rusting
  • Color coding helps determine size and simplifies inventory
  • Seamless construction
  • Fits standard industry dies
  • Mill certified, annealed low carbon steel provides consistent swaging without cracking

Click Here for Specification Sheet


Swage Sockets Closed

  • Forged from fine grain, special bar quality C-1035 steel
  • Spheroidized annealed for cold swaging
  • Recommended for use on 6" x 19" or 6" x 37" IWRC regular lay wire ropes. Can also be used on galvanized bridge rope.

NOT FOR USE ON FIBER CORE OR LANG LAY ROPES

  • Sockets have 100% efficiency rating based on catalog strength of wire rope when properly applied

Click Here for Specification Sheet


Swage Sockets Open

  • Forged from fine grain, special bar quality C-1035 steel
  • Spheroidized annealed for cold swaging
  • Recommended for use on 6" x 19" or 6" x 37" IWRC regular lay wire ropes. Can also be used on galvanized bridge rope.
    NOT FOR USE ON FIBER CORE OR LANG LAY ROPES
  • Sockets have 100% efficiency rating based on catalog
    strength of wire rope when properly applied

Click Here for Specification Sheet


Swivels

  • Hot dip galvanized - forged from special bar quality steel
  • Ultimate load is 5 times working load limit
  • Meets the performance requirements of RR-C-271D, Type VII, Class 2

Click Here for Specification Sheet


Tarphook

  • Zinc plated

Click Here for Specification Sheet


Thimbles

  • Malleable heavy-duty styles available
  • Malleable rope diameter up to 5/8"
  • Heavy-duty rope diameter up to 7/8"

Click Here for Specification Sheet


Turnbuckles

  • Hot dip galvanized
  • Forged body
  • Heat treated
  • Style available
    • Eye and eye
    • Hook and hook
    • Hook and eye
    • Jaw and eye
    • Jaw and jaw

Click Here for Specification Sheet


Weld on Hooks

  • Designed so the latch will never carry load when used under normal conditions
  • Heavy duty forged latch interlocks with hook tip
  • Large weld pad on forged alloy steel hook
  • Trace code forged into each hook
  • Detailed welding instructions included with each hook
  • Available working load limit from one to ten tons
  • Hook design allows easy sling hook up
  • Thumb tab on latch for convenient sling removal
  • Sling eye can be attached to hook by "slip and pull" method
  • Each hook forged with load marks to assist user in locating correct load zone

Click Here for Specification Sheet


Weld on Hooks Imported

  • Heavy duty forged latch interlocks with hook tip.
  • Large weld pad on forged steel hook.
  • Each hook has full Traceability.
  • Detailed welding instructions included with each hook.
  • Available working load limit from one to eight tons.
  • Thumb tab on latch for convenient sling removal.
  • Manufactured in China by a division of Columbus McKinnon Corporation.

Click Here for Specification Sheet


Winch Line Chains

Click Here for Specification Sheet

Return

Meerholz Canada LTD
1840 1st Avenue
Prince George, B.C. V2L 2Y9
Tel: (250) 562-2788
Fax: (250) 562-2782

Copyright © 2007-2018 Meerholz Canada Ltd. All Rights Reserved.
web services by Sticky Wicket Designs