single service

Inspections

Lifting equipment is utilized in most industries of today's economy. To obtain maximum efficiency and trouble-free operations, it is necessary to constantly monitor the equipment through detailed inspections and certification.

Choose a MAINTENANCE SCHEDULE that works best for you and let us do the rest. We'll automatically schedule your crane inspections and call to remind you when we're coming to perform the inspection. If you choose, we'll perform any possible repairs that can be done during inspections.

Meerholz Canada complies with the following when conducting crane & hoist inspections

• Complete inspection of all lifting equipment of 1 ton and up at intervals of a minimum 12 months, and as often as every
• month depending upon the activity, severity of service, and environment. OSHA 1910.179(1)(3)

meerholz difference

How Our Inspections Are Performed

Protect your employees, your production line and your investment; make sure to get thorough inspections done on all of your lifting equipment.

We do not:

• Walk around your shop performing operational tests on your overhead crane system and then give you a report stating that your crane has been properly inspected

WHAT WE DO:

• Inspect the wire rope and end connections for any signs of kinking, crushing, cutting, bird-caging, corrosion, reduced diameter or any other unusual wear. Check for proper reeving and lubrication.
• Visually inspect runway rails or beams for general conditions and properly installed safety equipment, end stops, rail bolts/clips, anti-collision devices, etc.
• Inspect the load block and hook for wear, bending, twisting, cracks, grooves, and throat opening.
• Check load brake for proper operation.
• Inspect the external parts of the hoist, trolley, framework, catwalk, handrails, etc., for broken parts, misalignment, broken welds, excessive wear, or any unusual conditions.
• Inspect motor brake for proper operation and air gap adjustment
• Open control boxes and check all contactors, relays, timers and other electrical components, for wear, proper operation, loose/broken connections, etc...
• Inspect main power system for collector shoe condition, festoon condition, etc., for signs of arcing or wear.
• Inspect safety devices, i.e. limit switches, etc., for proper operation.
• Inspect all oil/lube reservoir levels and check for leakage.
• Inspect motors, couplings and wiring for wear, deterioration and proper operation
• Visual inspection of gearboxes.
• Check entire unit for proper control operation and pendant labeling
• Inspect the sheaves, drums, wheels and bearings for general condition and lubrication.
• Make available easy to read and understandable reports

new service!

Vehicle Lift Inspections & Installations

We are committed to always being the leading edge with current product knowledge, training, and education. Armed with a powerful inspection reporting system, so you will feel confident with the quality of the inspection of your equipment.

We perform automotive lift inspections for all makes and models of lifts. Inspections are performed by Certified Inspectors who are highly qualified, experienced professionals, with expertise in the service and installation of automotive lifts; as well as provide all the necessary training to the operator.

services

Repairs

Meerholz Canada Ltd. provides repair services to overhead cranes and hoists as well as the installation of new and used equipment.

The Meerholz Advantage

• We provide expert reliable 24-hours 7 days a week overhead crane and hoist services to our Northern BC customers.
• Our service technicians are professionally trained to handle all your needs.
• We service all manufacturer’s equipment, using genuine manufacturer’s replacement parts.
• Written documentation reports are made on all inspections and services.
• We offer complete fabrication and installation services including runways and electrification.
• Our technicians can perform all Electrical, Mechanical & Structural repairs on your cranes.
• Our service rates are competitive, and our response times are the best in the industry.

Our reputation for reliable service is based on the following:

• Quick response time.
• Repairing problems correctly the first time.
• Offering quality parts and components at reasonable prices.
• Our calls are taken by people not automated services.
• We’ll estimate repair cost and get your approval first, no shocking surprises.

Other services we offer more than just crane repairs:

• Remote control programming & repair.
• Electrical designs.
• Building of electrical panels.
• All electrical repairs & troubleshooting.

need a fix?

Call Us!

IF IT’S BROKEN WE CAN FIX IT, IF WE CAN’T FIX IT THEN NO ONE ELSE CAN!

Contact us for fast and competent service on all brands of your equipment.

CONTACT US

services

Overhead Crane Load Test

For the safety of your employees and workplace, overhead crane load testing is required by CSA law. These tests ensure that your lifting equipment is in proper working order before you start using it for work.

What Does The Load Test Include?

Before using a new crane, it must be tested for the following functions:

• Hoisting and lowering
• Trolley travel
• Bridge travel
• Limit switches, locking and safety devices
• Rated load test

The trip setting of hoist limit switches will be determined by tests with an empty hook. The hook travels at increasing speeds up to the maximum speed. The actuating mechanism of the limit switch will be located so that it trips the switch, under any conditions. This must happen with sufficient time to prevent contact from the hook or block the hook with any part of the trolley.

What Is A Load Test?

During load tests, we will intentionally overload cranes to evaluate their condition. You should be able to safely lift and move the load through regular motions. Meerholz Canada wants to ensure the safety of your facility, so we conduct load tests for up to 125% to verify your equipment meets CSA standards.

Why Is A Load Test Necessary?

Load testing is mandatory for a new or altered crane. It reveals functional errors that occur under stress and lowers the risk of serious incidents involving overhead cranes and hoists. We will appoint a qualified individual to perform duties as an operator during the load test.

need a test?

Contact Us

If you want to learn more about our crane load testing services, contact Meerholz Canada today. We’re here to make sure everyone at your business is safe and productive throughout the year, under any circumstances.

single service

Crane Modernization

Take advantage of the latest in technological advances, and upgrade and modify your existing crane to meet your production demands and increase equipment life.

Meerholz Canada’s specially trained technicians will perform structural, electrical and mechanical modifications to your crane that will increase its reliability and performance while saving you the expense of purchasing a new crane. Modernizations may include upgrades to capacity, load and speed, lifting height, and classification. As with all of Meerholz Canada’s products and services, we guarantee 100% satisfaction with your modernized crane, providing full documentation, testing and re-certification of the upgraded unit.

Modernization Examples

• Advanced crane control methods
• Better positioning systems on cranes
• Increased capacity
• Rewiring of cranes
• Converting manual operation to motor control for smooth operation
• Re-aligning runway beams
• Adding radio control
• Adding variable frequency drive speed control
• Increasing or decreasing span of cranes

meerholz training

Overhead Crane & Hoist Operator Training

Operation of overhead cranes and hoists seems simple until one considers the knowledge and skills needed to conduct pre-operational inspections, how to control load swing, how crane component failure can be averted by proper use, and compliance knowledge required by standards. Ensuring safety and reliability is key to any operating environment and making sure your operators understand what’s necessary to ensure safety requires training.

Training Objectives:

• To ensure that overhead crane and hoist operators have the knowledge and skills required to recognize equipment deficiencies when conducting required inspections during use.
• To ensure that all personnel who operate cranes and hoists understand their responsibilities for safe use, and they comply with all OSHA/CSA training requirements as a competent person.

Course Overview:

This training may include top running overhead bridge cranes, under hung cranes, monorail hoists, gantry cranes, and jib cranes. Presented in an easy to understand manner, operators learn how to maintain safety, how to control loads, and become the first line of defense in accident avoidance. Technical training combined with hands-on training ensures competency of your personnel and allows them to learn from seasoned professionals.

start to finish services!

Electrical Contracting

Our industrial electrical contractors can handle all of your installation and repair needs, from motor controllers to transformers, no matter how big or small.

We’re passionate about providing highly specialized services to industrial electrical applications. Our expertise allows us to efficiently service and maintain the equipment necessary to keep your business up and running. Our services range from complete turn key electrical installations to providing shift maintenance coverage for Forestry, Pulp & Paper, Oil & Gas and Mining.

GO TO DUBRULE ELECTRIC

Vehicle lift inspections & installations

from the company with the leading edge in knowledge and quality.

performed by qualified Certified Inspectors.

We perform automotive lift inspections for all makes and models of lifts. Inspections are performed by Certified Inspectors who are highly qualified, experienced professionals, with expertise in the service and installation of automotive lifts; as well as provide all the necessary training to the operator.

We are committed to always being the leading edge with current product knowledge, training, and education. Armed with a powerful inspection reporting system, so you will feel confident with the quality of the inspection of your equipment.